P0312
System
Powertrain (Engine)
Wymagany skaner
Basic OBD2 code reader (engine codes, live data, smog readiness)

Cylinder 12 Misfire Detected

Understand P0312, common causes, and the right TOPDON scanner to diagnose it.

Misfire detected on cylinder 12 — same diagnostics as P0301–P0308 but for engines with more than eight cylinders or specific bank layouts.

Typowe objawy

  • Rough idle
  • Power loss
  • May set with P0300

Typowe przyczyny

  • Ignition coil or plug on cylinder 12
  • Injector fault
  • Low compression
  • Vacuum leak affecting that runner

Jakiego skanera potrzebujesz?

Basic OBD2 code reader (engine codes, live data, smog readiness)

Użyj danych na żywo i freeze frame przed wymianą części. Kody ABS, SRS i U zwykle wymagają skanera full-system.

Wskazówki diagnostyczne

  • Zapisz freeze frame, gdy pojawi się kod
  • Kasuj kod dopiero po usunięciu przyczyny
  • Sprawdź powiązane kody pending
  • Sprawdź, czy napięcie akumulatora jest powyżej 12,4 V przed podejrzeniem czujników

Polecane skanery TOPDON

  • Czytnik kodów TOPDON AL400 OBD2

    TOPDON AL400 OBD2 Scanner

    Podłącz go do dowolnego pojazdu z interfejsem OBD2 z roku 1996 lub nowszego, pobierz kody w ciągu kilku sekund i skorzystaj z wbudowanej biblioteki DTC, aby poznać definicje usterek przed wizytą w warsztacie. Idealny jako pierwsza diagnostyka.

    4.5 (832 ratings)
    120,00 zł

Często zadawane pytania

What does P0312 mean?
P0312 indicates cylinder 12 misfire detected. Misfire detected on cylinder 12 — same diagnostics as P0301–P0308 but for engines with more than eight cylinders or specific bank layouts.
Can I diagnose P0312 with a basic code reader?
Yes — P0312 is typically accessible with a basic OBD2 code reader like the TOPDON ArtiDiag201 or TopScan Lite. Live data helps confirm the repair.
Which TOPDON scanner do I need for P0312?
Basic OBD2 code reader (engine codes, live data, smog readiness) See recommended tools on this page.
Is it safe to drive with P0312?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.